NewAge Industries, Inc. - Coiltef™ Coiled Fluorinated Ethylene Propylene (FEP) Tubing

Unit of Measure

Items	360 0072-12 Coiltef™ 1/16 Inch (in) Inner Diameter (ID) A and 12 Maximum Available Expanded Length E Coiled Fluorinated Ethylene Propylene (FEP) Tubing	360 0072-24 Coiltef™ 1/16 Inch (in) Inner Diameter (ID) A and 24 Maximum Available Expanded Length E Coiled Fluorinated Ethylene Propylene (FEP) Tubing	360 0072-48 Coiltef™ 1/16 Inch (in) Inner Diameter (ID) A and 48 Maximum Available Expanded Length E Coiled Fluorinated Ethylene Propylene (FEP) Tubing	360 0149-12 Coiltef™ 1/8 Inch (in) Inner Diameter (ID) A and 12 Maximum Available Expanded Length E Coiled Fluorinated Ethylene Propylene (FEP) Tubing	360 0149-24 Coiltef™ 1/8 Inch (in) Inner Diameter (ID) A and 24 Maximum Available Expanded Length E Coiled Fluorinated Ethylene Propylene (FEP) Tubing
Description	N/A Made of chemically inert clear FEP Manufactured from FDA compliant materials Heat set into a retractable coil; excellent recoil memory Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing Allows flexibility to otherwise semi-rigid fluoropolymer tubing
Brands	N/A Coiltef™ NewAge
Material	N/A Fluorinated Ethylene Propylene (FEP)
Inner Diameter (ID) A	N/A 1/16 in	N/A 1/16 in	N/A 1/16 in	N/A 1/8 in	N/A 1/8 in
Outer Diameter (OD) B	N/A 3/16 in	N/A 3/16 in	N/A 3/16 in	N/A 1/4 in	N/A 1/4 in
Outer Diameter (OD) of Coil D¹	N/A 1-1/8 in	N/A 1-1/8 in	N/A 1-1/8 in	N/A 1-1/2 in	N/A 1-1/2 in
Maximum Available Expanded Length E (Not Including Tails)²	N/A 12 in	N/A 24 in	N/A 48 in	N/A 12 in	N/A 24 in
Wall Thickness	N/A 1/16 in
Tail Length	N/A 6 in
Shore Hardness	N/A 55 to 60 duro
Tensile Strength	N/A 2800 to 5000 psi
Elongation at Break	N/A 250 to 330 %
Brittle Temperature	N/A -450 ºF
Minimum Operating Temperature for Tubing	N/A -100 ºF
Maximum Operating Temperature for Tubing	N/A 200 ºF
Note for Operating Temperature	N/A Temperatures are for standard extruded (non-coiled) tubing. "Notes" for additional information.
Note for Physical Properties	N/A Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Recommended Fittings	N/A Pureloc® PFA compression fittings.
Industry Standards	N/A Food and Drug Administration (FDA)
Custom Services	N/A And More Cut Size
Note	N/A Made in U.S.A. Almost totally inert, Coiltef™ can be used with all industrial solvents, chemicals, and corrosive materials even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer’s non-stick property allows transport of viscous, sticky material without line clogging. It also offers outstanding aging resistance. Coiltef™ is manufactured through a fabrication process which heat sets the coils. The coils should remain stable up to 200°F. At higher temperatures the coils will begin to relax and lose their set. If the application involves elevated temperatures, in-house testing is recommended. Coiltef™ may be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Care should be taken with steam sterilization to prevent coil relaxation. Testing is recommended. Coiltef™ can be manufactured from 0.085" to 1/2" tubing I.D. The coil diameter can be produced from 3/4" O.D. to 4" O.D. The retracted length is approximately 1/4 of the maximum expanded length excluding tails. BOLD indicates the critical dimension for fittings application. Non-stock item; lead times and minimums apply - call for details. All Coiltef™ is made to order - call for details.
¹ These dimensions are nominal. ² These dimensions are nominal.