All Categories On NewAge Industries, Inc.

COMPANY HEADER

Request Information

Nylobrade^® Braid Reinforced Clear PVC Hose
Nylobrade® Braid Reinforced Clear PVC Hose
(23)
- Open mesh polyester braiding permanently encapsulated in walls of clear, flexible PVC tubing
- Listed by the National Sanitation Foundation for food equipment materials (NSF-51)
- Raw materials meet California Proposition 65; does not contain any known cancer-causing chemicals as listed by the state of California
- Free of DEHP and BPA
- Non-toxic raw materials conform to USP Class VI and FDA standards
- Offers far higher pressure capabilities than unreinforced PVC tubing
- Mirror smooth interior permits outstanding flow characteristics
- Crystal clear for full visual flow
- Corrosion and abrasion resistant with flexibility similar to rubber but with much longer life
- REACH and RoHS compliant
- A dependable hose with a proven track record of 60 years
- Huge inventory and same-day shipping
Clearflo^®70 Phthalate-Free PVC Tubing
Clearflo®70 Phthalate-Free PVC Tubing
(54)
- Phthalate, DEHP and BPA free
- Raw materials meet California Proposition 65
- Finished product meets USP Class VI equirements
- Made from non-toxic ingredients conforming to FDA standards
- Listed by the National Sanitation Foundation for food equipment materials (NSF-51)
- Glass-like clarity lets users see fluid flow
- Mirror-smooth surfaces provide outstanding flow characteristics
- Lightweight yet tough and abrasion resistant
- As flexible as rubber
- Handles a wide variety of chemicals, gases, and liquids
- Raw material meets UL94 HB burn rating
- REACH and RoHS compliant
- Our original Clearflo® tubing has been discontinued and replaced with the new phthalate-free Clearflo® 70.
Urebrade^® Braid Reinforced Clear Ether Based Polyurethane Hose
Urebrade® Braid Reinforced Clear Ether Based Polyurethane Hose
(9)
- Open mesh polyester braiding incorporated within the wall of flexible, ether-based polyurethane.
- Made from non-toxic raw ingredients conforming to FDA standards.
- Raw materials are listed by the National Sanitation Foundation (NSF 61) for use with potable water.
- Offers much greater pressure capability than unreinforced polyurethane tubing.
- Resistant to weathering, tearing, impact, abrasion, radiation exposure, oils, greases, and fuels.
- Wide range of temperature resistance; -90°F to 175°F.
- Free of DEHP, phthalates, BPA and conflict minerals.
- RoHS compliant.
- Naturally transparent for visual contact with the flow.
Silcon^® Unreinforced Silicone Tubing
Silcon® Unreinforced Silicone Tubing
(35)
- Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces.
- Able to resist extreme temperature variation: -100°F to 500°F (350°F maximum for NSF applications).
- Translucent natural color for visual contact with the flow.
- Resilient, stretchable, and resistant to compression set.
- Reusable — will withstand repeated sterilization.
- Odorless, tasteless, and inert.
- Good electrical and weatherability properties — resists U.V., ozone, gases, and moisture.
- Listed by the National Sanitation Foundation (NSF-51) for food equipment materials.
- Free of BPA, latex and phthalates.
- REACH and RoHS compliant.
Silcon^® Medical Unreinforced Silicone Tubing
Silcon® Medical Unreinforced Silicone Tubing
(18)
- Finished product meets USP Class VI requirements.
- Manufactured under good manufacturing procedures in a controlled environment.
- Able to resist extreme temperature variation: -100°F to 400°F.
- Reusable — will withstand repeated sterilization.
- Translucent natural color for visual contact with the flow.
- Odorless, tasteless, and inert.
- Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces.
- May be used on peristaltic pumps.
- Free of BPA, latex and phthalates.
- REACH and RoHS compliant.
Silcon^® Med-X Unreinforced Silicone Tubing
Silcon® Med-X Unreinforced Silicone Tubing
(19)
- Raw materials meet USP Class VI requirements.
- Manufactured under good manufacturing procedures in a controlled environment.
- Platinum cured for the highest degree of purity (least extractables).
- Reusable — will withstand repeated sterilization.
- Translucent natural color for visual contact with the flow.
- Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling.
- Free of BPA, latex and phthalates.
- REACH and RoHS compliant.
Silbrade^® Braid Reinforced Silicone Hose
Silbrade® Braid Reinforced Silicone Hose
(9)
- Open mesh polyester braiding incorporated within the walls of silicone tubing.
- Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces.
- Reusable — will withstand repeated sterilization.
- Translucent natural color for visual contact with the flow.
- Able to resist extreme temperature variation: -99°F to 350°F.
- Odorless, tasteless, and inert.
- Excellent weatherability properties — resists U.V., ozone, gases, moisture, and extreme temperatures.
- Offers far higher pressure capabilities than similarly-sized unreinforced silicone tubing.
- Listed by the National Sanitation Foundation (NSF-51) for food equipment materials.
- Free of BPA, latex and phthalates.
- REACH and RoHS compliant.
Silbrade^® Medical Braid Reinforced Silicone Hose
Silbrade® Medical Braid Reinforced Silicone Hose
(7)
- Open mesh polyester braiding incorporated within the walls of silicone tubing.
- Finished product meets USP Class VI requirements.
- Translucent natural color for visual contact with the flow.
- Able to resist extreme temperature variation: -99°F to 350°F.
- Reusable — will withstand repeated sterilization.
- Odorless, tasteless, and inert.
- Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces.
- Manufactured under good manufacturing procedures in a controlled environment.
- Free of BPA, latex and phthalates.
- REACH and RoHS compliant.
Clearflo^® Ag-47 Antimicrobial Clear PVC Tubing
Clearflo® Ag-47 Antimicrobial Clear PVC Tubing
(17)
- Made from non-toxic ingredients conforming to FDA standards
- Free of phthalates, latex and animal-derived ingredients
- Listed by the National Sanitation Foundation (NSF-51) for food equipment materials
- Antimicrobial ingredient is throughout the tubing, not only on an inside liner as with other products
- Transparent for visual flow contact
- Contains antimicrobial technology to guard against bacteria such as E. coli, listeria, salmonella, legionella, MRSA, campylobacter and pseudomonas
- Well suited for food and beverage applications including non-fatty aqueous, milk and alcoholic beverages (below 20 % ABV)
- Heat sealable
Newflex^® FH/FHS/VFH Spiral Reinforced PVC Suction Hose
Newflex® FH/FHS/VFH Spiral Reinforced PVC Suction Hose
(33)
- 100 % PVC construction
- Spiral reinforcement made from rigid PVC to resist impact, crushing, and kinking
- Lighter than ply-wrapped rubber and other similar hoses
- Available in Food and Industrial Grades
- Food Grade made from non-toxic ingredients conforming to FDA and 3-A standards
- Smooth interior produces low friction loss permitting maximum flow
Vardex^® Clear Steel Wire Reinforced PVC Suction Hose
Vardex® Clear Steel Wire Reinforced PVC Suction Hose
(9)
- Spiral steel wire reinforcement incorporated within the wall of flexible PVC tubing
- Made from non-toxic ingredients conforming to FDA standards
- Kink and crush resistant
- Handles pressure and full vacuum (29.9 in./Hg.) applications
- Glass-like clarity with mirror-smooth surfaces provide outstanding visual flow characteristics
- Lightweight compared to rubber hose, yet tough and abrasion resistant
Superthane^® Unreinforced Polyurethane Tubing
Superthane® Unreinforced Polyurethane Tubing
(46)
- Available in Ester or Ether formulations
- Both formulations made from non-toxic raw materials conforming to FDA standards for use with wet and fatty food contact surfaces
- Extremely resistant to weathering, tearing, impact, radiation, and abrasion
- Transparent, flexible, resilient, tough; resistant to oils, greases, and fuels
- Wide range of temperature resistance: -85 ºF to 185 ºF (ester)
- Ether-based raw material is listed by the National Sanitation Foundation (NSF 61) for use with potable water
- Ester-based raw material is free of animal derived components
- Free of DEHP, phthalates, BPA and conflict minerals
- Can be heat sealed, coiled, fabricated, or bonded
Nylotube^® Nylon-12 Tubing
Nylotube® Nylon-12 Tubing
(78)
- Very low moisture absorption: 1.4 % maximum (at 73ºF)
- Will not become brittle or swell because of water
- Excellent resistance to flexural fatigue, tube vibration, and movement
- Lightweight with excellent bend radii and pressure ratings
- Resists crushing, abrasion, and cracking
- Heat and light stabilized
- Free of BPA, conflict minerals, phthalates and latex
- Available in semi-rigid or flexible grade, inch and millimeter sizes, and in colors
Silbrade^® Platinum Cured Braid Reinforced Silicone Hose
Silbrade® Platinum Cured Braid Reinforced Silicone Hose
(5)
- Platinum cured for the highest degree of purity
- Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces
- Listed by the National Sanitation Foundation (NSF-51) for food equipment materials
- Odorless, tasteless, and inert
- Open mesh polyester braiding incorporated within walls of silicone offers increased pressure capabilities
- Able to resist extreme temperature variation: -100 ºF to 400 ºF
- Translucent natural color for visual contact with the flow
- Kink resistant yet highly flexible
- Reusable - will withstand repeated sterilization
- Excellent weather ability properties - resists U.V., ozone, gases, moisture, and extreme temperatures
- Manufactured in a controlled environment
- Free of BPA, latex and phthalates
Vitube^® FKM Tubing
Vitube® FKM Tubing
(27)
- Made of 100% pure Fluorocarbon (FKM), a high performance synthetic rubber
- Excellent temperature resistance: -40 °F (-30 °F for Type A) to 400 °F continuously; 600 °F periodically
- Offers the widest range of fluid and chemical resistance of any commercial rubber
- Excellent resistance to oils, fuels, lubricants, and most mineral acids
- Also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene
- Excellent resistance to environmental exposure such as sunlight and ozone
- Available in 75 and 60 Shore A durometers (Type A and Type B)
Clamps for Plastic Tubing and Hose
Thermobarb® Plastic Barbed Fittings and Hose Nipples
Thermobarb® Plastic Barbed Fittings and Hose Nipples
- Precision molded in nylon-6, high density polyethylene, PVDF, polypropylene, glass-fiber reinforced nylon, or glass-fiber reinforced polypropylene
- Lightweight, compact, easy to install and disconnect
- High impact strength
- Excellent chemical resistance
- Free of phthalates
Kwik Clamp™ Nylon Double Bond Hose Clamps
Kwik Clamp™ Nylon Double Bond Hose Clamps
(31)
- Made of durable, black nylon 6-6, a U.L. Recognized Component
- Will not rust or corrode
- Easy to install and remove with hose in place; reusable
- Handles temperatures from -40 ºF to 340 ºF (Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended.)
- Handles most moderate non-hydraulic pressure applications
- Patented double row of teeth ensures a strong bond that will not vibrate loose
- Heat and light stabilized
Plastic Pinch Clamps
Plastic Pinch Clamps
(3)
- Autoclavable
- One piece construction for easy operation; no sharp edges to damage tubing
- Free of animal derived ingredients, BPA and conflict minerals
- Accurate flow rate (Applies to 502 2556 and 502 2591 only. 502 2521 does not offer an adjustable flow rate; open or closed only.)
- Gamma stable (Applies to 502 2521 and 502 2591 only. Discoloration may occur from exposure.)
- California Prop 65 compliant
Thermobarb® Brass Barbed Fittings
Cam Operated Plastic Couplings
Fluoropolymer Tubing
Fluoropolymer Tubing
- Chemically inert; low permeability
- Lowest coefficient of friction of any solid material
- Excellent electrical and weathering properties; non-flammable
- Made without plasticizer which can leach into critical streams
- Free of animal derived components
- Raw materials are FDA and USP Class VI compliant
- REACH and RoHS compliant
- PTFE is free of BPA, phthalates and latex
- FEP and PFA are free of conflict minerals
- Ultra-high-purity grades available for the semiconductor industry (FEP and PFA only)
Coiltef™ Coiled Fluorinated Ethylene Propylene (FEP) Tubing
Coiltef™ Coiled Fluorinated Ethylene Propylene (FEP) Tubing
(14)
- Made of chemically inert clear FEP
- Manufactured from FDA compliant materials
- Heat set into a retractable coil; excellent recoil memory
- Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing
- Allows flexibility to otherwise semi-rigid fluoropolymer tubing
Pureloc® Perfluoroalkoxy Alkanes (PFA) Compression Fittings
Contef™ Convoluted Polytetrafluoroethylene (PTFE) Tubing
Contef™ Convoluted Polytetrafluoroethylene (PTFE) Tubing
(16)
- Translucent PTFE tubing offers excellent chemical and electrical properties
- Available from stock with or without a stainless steel wire encircling the O.D.
- Wire coil provides increased pressure capability and aids in electrical grounding
- Easily flexed - spiral construction allows far greater flexibility than straight wall tubing
- Spiral construction also allows for easier cleaning
- Made from FDA compliant materials
Corrtef™ Corrugated Fluorinated Ethylene Propylene (FEP) Tubing
Corrtef™ Corrugated Fluorinated Ethylene Propylene (FEP) Tubing
(9)
- Made from FEP fluoropolymer tubing
- Corrugations allow a nearly zero bend radius - easily flexed
- Can be extended or compressed without affecting the tube's I.D.
- Made without plasticizers which can leach into critical streams
- Made from FDA compliant materials
- Has all the chemical and electrical properties of straight-walled FEP tubing
- May be over braided with Kevlar® for higher pressures (Over braiding with Kevlar will permit a minimum increase of six times the listed pressures. Kevlar® over braiding is available for sizes up to 7/8" I.D. - call for details.)
Newloc® Acetal Plastic Push-To-Connect Fittings
Newloc® Brass Push-To-Connect Fittings