COMPANY HEADER
Request Information
  • Made of chemically inert clear FEP
  • Manufactured from FDA compliant materials
  • Heat set into a retractable coil; excellent recoil memory
  • Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing
  • Allows flexibility to otherwise semi-rigid fluoropolymer tubing
Unit of Measure

Specifications

Brands

 N/A Coiltef™ NewAge

Material

 N/A Fluorinated Ethylene Propylene (FEP)

Inner Diameter (ID) A

 N/A 1/16 in

Outer Diameter (OD) B

 N/A 3/16 in
Outer Diameter (OD) of Coil D1 N/A 1-1/8 in
Maximum Available Expanded Length E (Not Including Tails)2 N/A 48 in

Wall Thickness

 N/A 1/16 in

Tail Length

 N/A 6 in

Recommended Fittings

 N/A Pureloc® PFA compression fittings.

Industry Standards

 N/A Food and Drug Administration (FDA)

Custom Services

 N/A And More Cut Size

Physical Properties

Shore Hardness

 N/A 55 to 60 duro

Tensile Strength

 N/A 2800 to 5000 psi

Elongation at Break

 N/A 250 to 330 %

Brittle Temperature

 N/A -450 ºF

Minimum Operating Temperature for Tubing

 N/A -100 ºF

Maximum Operating Temperature for Tubing

 N/A 200 ºF

Note for Operating Temperature

 N/A Temperatures are for standard extruded (non-coiled) tubing. "Notes" for additional information.

Note for Physical Properties

 N/A Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Note

Note

 N/A Made in U.S.A.

Almost totally inert, Coiltef™ can be used with all industrial solvents, chemicals, and corrosive materials even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals.

Fluoropolymer’s non-stick property allows transport of viscous, sticky material without line clogging. It also offers outstanding aging resistance.

Coiltef™ is manufactured through a fabrication process which heat sets the coils. The coils should remain stable up to 200°F. At higher temperatures the coils will begin to relax and lose their set. If the application involves elevated temperatures, in-house testing is recommended.

Coiltef™ may be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Care should be taken with steam sterilization to prevent coil relaxation. Testing is recommended.

Coiltef™ can be manufactured from 0.085" to 1/2" tubing I.D. The coil diameter can be produced from 3/4" O.D. to 4" O.D.

The retracted length is approximately 1/4 of the maximum expanded length excluding tails.

BOLD indicates the critical dimension for fittings application.

Non-stock item; lead times and minimums apply - call for details.

All Coiltef™ is made to order - call for details.
  • 1 These dimensions are nominal.
  • 2 These dimensions are nominal.