NewAge Industries, Inc. - Pureloc® Perfluoroalkoxy Alkanes (PFA) Compression Nut Replacement Kits

Unit of Measure

Items	532 6860 Pureloc® 1/8 Inch (in) Tubing Outer Diameter (OD) Perfluoroalkoxy Alkanes (PFA) Compression Nut Replacement Kit	532 7056 Pureloc® 1/4 Inch (in) Tubing Outer Diameter (OD) Perfluoroalkoxy Alkanes (PFA) Compression Nut Replacement Kit	532 7252 Pureloc® 3/8 Inch (in) Tubing Outer Diameter (OD) Perfluoroalkoxy Alkanes (PFA) Compression Nut Replacement Kit	532 7448 Pureloc® 1/2 Inch (in) Tubing Outer Diameter (OD) Perfluoroalkoxy Alkanes (PFA) Compression Nut Replacement Kit	532 7644 Pureloc® 3/4 Inch (in) Tubing Outer Diameter (OD) Perfluoroalkoxy Alkanes (PFA) Compression Nut Replacement Kit
Description	N/A PFA body made from virgin, high purity materials Ideally suited for corrosive environments and chemical applications Less surface particulate resulting in cleaner operation Easy to disconnect and reuse Excellent lock and seal ability Numerous configurations available Contains one nut, one gripper, and one ferrule.
Brands	N/A NewAge Pureloc®
Material	N/A Perfluoroalkoxy Alkanes (PFA)
Tubing Outer Diameter (OD)	N/A 1/8 in	N/A 1/4 in	N/A 3/8 in	N/A 1/2 in	N/A 3/4 in
Fitting Size	N/A 1/8 in	N/A 1/4 in	N/A 3/8 in	N/A 1/2 in	N/A 3/4 in
Tubing Inner Diameter (ID)	N/A 1/16 in	N/A 5/32 in	N/A 1/4 in	N/A 3/8 in	N/A 5/8 in
Pressure Ranges	N/A 125 psig8.6 bar
Materials of Construction	N/A Non-Wetted: Perfluoroalkoxy Alkanes (PFA) Nut, Titanate Filled Ethylene Tetrafluoroethylene (ETFE) Gripper Wetted: Perfluoroalkoxy Alkanes (PFA) Body, Polytetrafluoroethylene (PTFE) Ferrule
Installation Instructions	N/A Cut tubing (A) cleanly at 90º. Push tubing through small end of nut (B), small end of gripper (C), large end of ferrule (D), and seat tubing end into fitting body as far as it will go (E). Thread nut onto body and finger tighten while assuring that tubing remains seated in bottom of fitting. To complete the installation, tighten nut with a wrench at least one additional turn. Avoid overtightening.
Note	N/A With a fitting body made from virgin, high purity PFA fluoropolymer, Pureloc® is ideal for ultra-pure fluid applications where contamination free systems are used. This includes semiconductor manufacturing, food and beverage processing, medical and biomedical, laboratory, chromatography equipment, and the chemical industries. The gripper coupled with the precision-made ferrule provides excellent leak-tight connections and prevents tubing blow-out. The values above are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. NewAge Industries' Pureloc® PFA compression fittings are manufactured by Parker-Hannifin Corporation.